According to Bargh News, it is not surprising that they use electricity when the electrical devices are on. However, all of these appliances still use electricity until we turn them off. In fact, more than 10 percent of our electricity bills are for devices we may not have used many times, but were on. As a result, a large amount of money from the electricity bill each month indicates the amount of energy lost.

So why do electronic devices consume energy even when turned off? When a device is plugged in, it consumes at least a small amount of energy. For many devices, this is a low amount of energy; It will be remarkable. In this section, we are going to introduce the most common household appliances that consume electricity even in the event of a blackout, as well as ways to reduce their environmental footprint.

Electronics that consume power outages:

1- Digital TV receiver Despite the ability to record digital image (PVR) on some TVs and of course all digital TV receivers, you can easily and automatically record your favorite movies and pictures and watch them at any time, but This is not possible without electricity. In addition, it requires energy to prepare for receiving remote signals.

2. The router and modem The modem will remain connected to the Internet, and the router will continuously play the Wi-Fi signal, even when no device is connected to it.

3- TV Have you ever paid attention to the red light of the TV even when it is off? This is just a sign that he is still using energy. Many newer TVs have a feature that can be turned on automatically by other devices or your voice, which also requires power to turn on through the controller.

4. Blu-ray / DVD player These devices usually display time and therefore always use energy to keep their LED displays on. In addition, they must be turned on to receive the signal remotely.

5. The computer When we turn off the computer, many of us do not actually turn it off, but put it in standby or hibernation mode. At this time, the computer is kept in low power mode so that programs remain active and turn on quickly when working with it. This is also true when the on / off button is not pressed, as it is on standby to receive the signal from you.

The post Devices that consume electricity during a blackout! appeared first on شرکت پژوهنده نیرو.

The CEO of Tavanir recommended high-consumption solar cells to be installed

The CEO of Tavanir Company announced the implementation of the national “Electricity of Hope” scan from the beginning of November this year and said: “The purpose of this project in the country is to improve the pattern of electricity consumption in the home sector and high-consumption consumers are advised to install their surplus energy by installing cells.” Solar supply.

Motavilizadeh added: “In this plan, electricity subscribers are divided into three groups: low consumption, good consumption and high consumption, and the criterion for determining the group among subscribers is to observe the monthly consumption pattern in hot and cold seasons of the year, which means that if subscribers are less than the pattern They are assigned to the low consumption group and a 100% discount is applied on their electricity bills.

The post Tavanir CEO recommended high-consumption solar system installation appeared first on شرکت پژوهنده نیرو.

According to the Tehran Regional Electricity Company (Tabesh) news site, Engineer Arash Kurdi, CEO of the company, announced the news: “These projects are in the form of development and construction of transmission and distribution networks with the aim of increasing and stabilizing the network covered by the electricity company.” Tehran (Tehran, Qom and Alborz provinces) and the continuation of services and satisfaction of the company’s subscribers will be implemented and operated.

The post Development plan and construction of networks of Tehran Regional Electricity Company appeared first on شرکت پژوهنده نیرو.

“Majid Abdollahi” continued in this regard: “Among the measures taken and in progress, the 63 kV switch of the mission post can be replaced with all gaskets and o-rings; Inspect and inspect all parts and send a report if there are major defects; Complete change of hydraulic oil and washing of all oil lines; Replacement of worn hydraulic hoses; Gas leak detection of SF6 compartments and elimination of gas leakage if any; Complete staining of breaker mechanism; Installation of gas gauge (manometer) on all compartments mentioned.

It is worth mentioning that the 63 kV switchgear of Resalat post consists of 4 buses, the major repairs of two bays were carried out from 10 Aban 99 to 25 Aban 99, and the other two bays started on 1 January and ended on 28 December 99.

A set of equipment that connects different feeders to the busbar or different parts of the busbar to each other at a certain voltage level is called a switchgear.

The post Increasing the stability of the electricity network in the northeastern part of Tehran appeared first on شرکت پژوهنده نیرو.